The Door Renew Process | WE BELIEVE IN OUR INTENSIVE, DETAIL-ORIENTED PROCESS SO MUCH THAT WE GUARANTEE THAT YOUR EXTERIOR DOOR WILL NOT PEEL, FADE, OR CRACK FOR TWO YEARS OR WE WILL REPAIR YOUR DOOR AT NO COST.
Step 1 | Strip Existing Door
In order to restore a door to its original beauty, the door must first be stripped down to naked wood or fiberglass.
Step 2 | Sand to Perfection
With the old finish removed, the door is prepped to receive the new finish. This is done through meticulous sanding to remove blemishes from the old coat.
Step 3 | Stain Door
Step 4 | Marine Grade Finish
We seal all of our doors in at least 5 coats of a Hi-Build varnish equivalent to 12 coats of a traditional varnish. Then we apply a top coat. This results in a marine grade finish that you can count on to withstand the constant beating of the elements. Products we use include those by Petit, Varathane and Cabot.